Reely Hendheld RC 2.4 GHz No. of channels: 6 1310037 用户手册

 On demand, another toggle switch for switching the flight conditions can be assigned in the following menu

switch assignment menu (Switches assign). 

 In the flight condition „Idle up“, the pitch curve should be set so that the rotor blades reach the maximum positive

and negative angle of attack.

•  Repeat the above process again and set the desired value of the pitch curve for all five points in the flight condition

„Idle up“ as well. 

•  Keep the button „CANCEL“ pushed for a longer period to save the settings. The display then shows the function

setup menu again.

•  Push the button „CANCEL“ repeatedly until you get back to the operating display.

Precise information on the respective angles of attach of the rotor blades in the different flight conditions can

usually be taken from the documents of the model helicopter. 

Please observe that the pitch and throttle curves influence each other. If you lift the pitch curve in a specific

point, the larger angle of attack of the rotor blades may require lifting the throttle curve in this point as well.