Renkforce 808577 用户手册
42
b) Mains Adapter
• The mains adapter is constructed pursuant to protection category II.
• Only connect the mains adapter to proper mains sockets of the public mains.
• The mains socket for the plug-in mains adapter must be close to the screen/DVR and easily
accessible.
• The plug-in mains adapter is intended for use in dry, closed indoor rooms; it must not become
damp or wet. There is danger to life from electric shock!
• Do not pull the plug-in mains adapter from the mains socket by pulling the cable.
• Protect the cables of the plug-in mains adapter from sharp edges, do not stop on them.
• If the mains adapter is damaged, do not touch it. Danger to life from electric shock!
First deactivate all sides of the mains socket to which the plug-in mains adapter is connected
(e.g. switch off the respective fuse or turn out the fuse. Then deactivate the associated FI pro-
tection switch).
Only then pull the plug-in mains adapter from the mains socket and take the product to a spe-
cialist workshop.
• Only use the enclosed plug-in mains adapter to operate the screen/DVR and the connected
cameras. In case of defects of the plug-in mains adapter, replace it with a stabilised plug-in
mains adapter of the same build with the same technical data (voltage/current).
c) Screen/DVR
• The screen/DVR is only suitable for dry, closed rooms. Do not expose it to direct sunlight, heat,
cold, dampness or wetness; otherwise, it will be damaged.
• Never cover the ventilation slots on the back.
• Mount the screen/DVR on stable surfaces only.
• Do not push the display surface too hard. This will not only leave scratches, but the display may
also break and be permanently damaged. Loss of guarantee/warranty.
d) Cameras
• The cameras are suitable for indoor and outdoor use (IP65). However, they must never be
operated in or under water; they would be destroyed by this.
• The cameras must not be exposed to extreme temperatures, intense vibration or heavy mecha-
nical strain.
• Ensure that the connection cable is not crushed, bent or damaged by sharp edges.
• The operation of these cameras is no substitute for your responsibility to supervise children or
other people in need of special care. It only serves as a support.
• Install the cameras so that they do not point right at bright light sources (e.g. the sun or spot-
lights). This will not only cause an overmodulated and useless image, but also may damage the
image sensor it permanently exposed.