Renkforce 808577 用户手册

•  The enclosed mounting base can be screwed on to a slot at the back of the screen/DVR. Holes in the

mounting base or a double-sided adhesive tape can be used to fasten the mounting base on demand. 

  Use suitable screws and possibly dowels for the underground. When drilling or screwing on, observe 

that no cables or lines are damaged.

  If the mounting base is only to be used as a standing base, set up the screen on a stable, level and suf-

ficiently large area only. Protect expensive furniture surfaces from impressions or discolouration with 

suitable pads.

•  If there is a protective strip on the display, remove it now.
•  Connect the low-voltage round plug the two enclosed plug-in mains adapter to the corresponding socket

(11) of the screen/DVR.

  Plug the plug-in mains adapter into a proper mains socket of the public mains. The LED (8) should now be 

lit blue.

•  Insert a SD/SDHC memory card (max. 32GByte) into the memory card slot (12) at the right edge of the

screen/DVR so that it latches. 

  Observe that the writing protection of the SD/SDHC memory card is deactivated. 

 

The memory card should be empty (or there still must be enough memory left). The only file format 

permitted is FAT/FAT32 (no NTFS).

•  The screen/DVR and cameras are now ready for operation.