Renkforce 808577 用户手册
51
e) Setting the Volume
The two cameras do not have any integrated microphone. However, the screen/DVR supports other came-
ras with microphone as well that have the same western plug system as the two enclosed cameras.
„8“ button = increase volume
„2“ button = reduce volume
At the left of the display, a bar chart with the currently set volume level appears when the button is pushed.
„8“ button = increase volume
„2“ button = reduce volume
At the left of the display, a bar chart with the currently set volume level appears when the button is pushed.
this display goes out again after a few seconds.
f) USB Connection
The USB socket can be used to read the SD-/SDHC memory card as via a commercial card reader. The
necessary drivers are integrated into the operating system (at least Windows XP is recommended).
At connection, the corresponding message appears in the display („USB Connect....“).
At connection, the corresponding message appears in the display („USB Connect....“).
While a recording is running, the USB connection has no function.
11. The OSD Menu
a) Operation of the OSD Menu
You may use the buttons on the screen/DVR for this as well as those on the IR remote control.
• To call the OSD menu, either push the screen/DVR button „MENU/ESC“ or the button „MENU“ on the IR
remote control.
If a recording is running (or motion detecting was activated and the screen/DVR is waiting for a
motion in the recording area), the OSD menu cannot be called. Terminate the recording (or stop
motion detection) by pushing the button „REC/STOP“.
• Use four arrows to select the present submenus submenus/functions within the OSD menu.
• Confirm selection of a submenu/function or setting with the button „
• Confirm selection of a submenu/function or setting with the button „
“.
• To leave the OSD menu (or to return to the previous menu from a submenu), either push the screen/DVR
button „MENU/ESC“ or the button „MENU“ on the IR remote control.