Superrollo Professional TA50 Garage Door Motor 50kg SR40050 数据表
产品代码
SR40050
61
EN
i
Connecting additional electrical equipment
When working on electrical systems there is
a risk of danger to life due to electrocution.
◆
◆
The connection of additional electrical equipment
must only be carried out by a qualified electrician.
◆
◆
Before opening the protective cover always dis-
connect the equipment from the mains power supply
and check that the system is free of voltage.
Accessories from other manufacturers may
result in malfunctions or damage to property.
◆
◆
Use only original accessories. A separate source
voltage at the screwtype terminal for the external
switch will result in a short circuit and will destroy
the door operator’s electronics.
◆
◆
Do not connect any separate source voltages to the
terminal for the external switch. The terminals are
potential-free contacts.
potential-free contacts.
Key
1 =
Motherboard
2 =
Infrared-photocell barrier (optional)
3 =
External switch (optional)
Connecting conditions for connecting an
infrared photocell barrier:
Voltage:
Voltage:
= + 12 V
Curent:
= max. 150 mA
Type:
= NC
If the external buttons are not connected
properly, the operational safety of the
equipment is at risk.
Always mount the internal button, programming
Always mount the internal button, programming
button, etc.:
◆
◆
outside the reach of movable parts
◆
within visibility of the door
◆
at a height of at least 1.5 metres
GND
+
12V
COM
OUT
GND
+ 12V
IR
GND
+
12V
1
2
3
Ext. switch (type: NO)
GND
Pass Door contact
GND
Pass Door contact
NOTE: If pass door contact assembled, remove jumper