Superrollo Professional TA50 Garage Door Motor 50kg SR40050 数据表

产品代码

SR40050

Maintenance

Defective door systems and safety equipment

result in the risk of injury.
For your safety, you should comply with the

recommended maintenance intervals for your

door system, including all safety equipment.
Maintenance interval:
Have the door system inspected by a spe-

cialist company before initial operation and

then as required, but at least once a year.
Regular checks of wearing parts:
There is a risk of injury due to defective

or worn components.
Check the system therefore regularly for signs of wear,

damage or lack of balance of the door.
Do not use the door under any circumstances if repairs or

adjustments need to be made, as a faulty or imbalanced
door can lead to injuries.

Monthly checks on the obstacle recognition (power limiting)

Run the door into the final open position.
Place a 50 mm high object, e.g. a wooden

block, in the direction of travel of the door.
Close the door by actuating the hand trans-

mitter.
If the door hits an obstruction when closing

or opening, the door operator automatically

stops and opens the garage door fully.
After this, remove the obstruction.
After removing the obstruction, you can

operate the garage door operator nor-mally

again.

1.
2.

5.
6.

Placing an approx. 50 mm wooden block in the direction

of travel of the door.

Check:
◆

All screw connections to ensure they are tight

◆

Cables for damage

◆

Springs and fixing parts

There is a risk of injury due to the extremely

taut door springs.
◆

Never replace the door springs yourself.

◆

Have all work on the mechanical system and springs

carried out by a qualified person.

If necessary, correct and check the alignment

once again, as an incorrect alignment cause

pose a threat.