Ricoh SP 201N 数据表
Loading Paper
Load a stack of paper for printing in the input tray.
• When loading paper, be sure to configure the paper size and paper type for the bypass tray and
Tray 1. When printing a document, specify the paper size and paper type and select the paper
tray in the printer driver so that the settings configured when paper is loaded can be used for
printing.
tray in the printer driver so that the settings configured when paper is loaded can be used for
printing.
• If you print test pages when the bypass tray is loaded, the paper in the bypass tray is fed first.
• Do not load paper in the bypass tray when the machine is warming up.
• Do not load paper in the bypass tray when Energy Saver mode is enabled.
• Curled paper may jam. Straighten curled paper before loading.
• Do not load paper in the bypass tray when the machine is warming up.
• Do not load paper in the bypass tray when Energy Saver mode is enabled.
• Curled paper may jam. Straighten curled paper before loading.
Loading Paper into Tray 1
1.
Pull Tray 1 out slowly, and then remove it using both hands.
CTT062
Place the tray on a flat surface.
2.
Pinch the clips on the side paper guides and slide them to match the standard size.
CTT073
Loading Paper
25