Renkforce Wireless Surveillance Kit808578 Resolution (TVL) 420 TVL 808578 数据表

Switch the DVR on or off, with the slider (1) at the rear of the DVR („ON“ = activated, „OFF“ = deactiva-

ted).

  The radio cameras cannot be switched on or off. They work permanently if the power is connec-

ted.

Briefly push the button „MENU/ESC“ on the DVR or the button „MENU“ on the IR remote control. Then the 

OSD menu is displayed.
To leave the OSD menu, also briefly push the button „MENU/ESC“ on the DVR or the button „MENU“ on the 

IR remote control (several times if required, if the DVR is in a submenu).

As a special feature, the small housing (16) in the radio camera‘s cable holds a microphone. The radio

camera therefore not only shows the image of the monitored area, but also permits hearing monitored 

sound. 
The playback volume can be set at the DVR or the IR remote control:
„8 V+“ button on the DVR or „8“ button on the IR remote control = increase volume
„2 V+“ button on the DVR or „2“ button on the IR remote control = reduce volume

  If the radio camera is operated too close to the screen/DVR (e.g. for testing at initial commissio-

ning or when logging the radio camera on to the screen), there may be a feedback and whistling 

sound. Then reduce the volume as described above.

 

The volume cannot be set in zoom mode, since the arrows are used to move the visible section of 

the screen here. If required, briefly switch to the quad or auto mode (see chapter 10 e) by pushing 

the button „PLAY/ENTER“ on the DVR or the button „

“ on the IR remote control and then set 

the volume as desired.