Lecroy WAVEACE 2034 4-channel oscilloscope, Digital Storage oscilloscope, WaveAce 2034 用户手册
产品代码
WaveAce 2034
Operator's Manual
920836 Rev A
17
ACQUISITION - AUTO_SETUP, ASET
Description
The AUTO_SETUP command displays the input signal(s) by adjusting the vertical, timebase, and
trigger parameters. AUTO_SETUP operates on all channels.
trigger parameters. AUTO_SETUP operates on all channels.
If signals are detected on several channels, the lowest numbered channel with a signal
determines the selection of the timebase and trigger source.
determines the selection of the timebase and trigger source.
If only one input channel is turned on, the timebase will be adjusted for that channel.
Command Syntax
Auto_SETup
ACQUISITION - ATTENUATION, ATTN
Description
The ATTENUATION command selects the vertical attenuation factor of the probe. Values up to
1000 can be specified.
1000 can be specified.
The ATTENUATION? query returns the attenuation factor of the specified channel.
Command Syntax
<channel>: ATTeNuation <attenuation>
<channel>:= {C1,C2,C3,C4,EX,EX10}
<attenuation>:= {1,5,10,50,100,500,1000}
Query Syntax
<channel>:ATTeNuation?
Response Format
<channel>:ATTeNuation <attenuation>
Example
The following instruction sets to 100 the attenuation factor of Channel 1:
C1:ATTN 100