Aei DigiSender X7 DG440 Advanced Wireless Video Sender System, N/A, DG440 数据表
产品代码
DG440
Page 10
Online Support at www.digisender.net
DG440 - DigiSender® X7
continued...
STEP 4
Connect the power supply unit to the socket
labelled PSU.
labelled PSU.
STEP 6
STEP 5
Press the POWER button on your DigiSender
remote control to switch the receiver on. The
power LED will be green to indicate the device is
switched on.
Switch on the second television and select it’s
SCART channel. This will be labelled on the
remote control as one of the following buttons:
remote control to switch the receiver on. The
power LED will be green to indicate the device is
switched on.
Switch on the second television and select it’s
SCART channel. This will be labelled on the
remote control as one of the following buttons:
AV, VIDEO, VCR, AUX, SCART,
EXT, 0
EXT, 0
Refer to your tv’s manual for further assistance.
Connect the power supply unit (PSU) to an
available wall socket.
available wall socket.
BEDROOM
BEDROOM
BEDROOM
Did you know? The receiver can be connected to a Hi-Fi unit using
the Left & Right Audio outputs on the rear of the DigiSender®receiver unit.
Phono cable may be required.
the Left & Right Audio outputs on the rear of the DigiSender®receiver unit.
Phono cable may be required.