Samsung BN59-01012A 数据表
English
13
|
03
Connections
HT-H4550R
FRONT / SURROUND
(L)
(L)
(R)
(R)
SUBWOOFER
STAND
SPEAKER CABLE
SCREW (5x15): 16EA
STAND BASE
CENTRE
Installing the Speakers on the Tallboy Stand
* HT-H4550R only - Front/Surround Speakers
1.
Turn the Stand Base upside-down and connect it to the Stand.
2.
Use the driver to combine the screws on the 3 marked holes.
3.
Straighten a supplied speaker wire to the gravity direction and put
in the hole on the centre of Stand Base.
4.
Connect the upper Speaker to the assembled Stand.
5.
Insert a screw clockwise into the hole on the rear of the speaker
using a screwdriver.
And then connect a speaker cable.
6.
This is the appearance after the speaker is installed.
Follow this steps to install other speaker.
Connecting The Speakers
1.
Match each speaker cable bundle to the correct speaker by matching the colour
coded plug on each bundle to the coloured sticker on the bottom of each speaker.
2.
To attach speaker wire to each speaker:
a. Press down the red tab on the back of the speaker, insert the red wire, and then
release the tab.
b. Press down the black tab on the back of the speaker, insert the black wire, and
then release the tab.
3.
Connect the speaker wire plugs from each speaker to the back of the product by
matching the colours of the speaker plugs to the colours of the speaker jacks.
Black
Red
Stand Base
Stand
3
4
Speaker
Stand
2
5
6
1