Samsung BN59-01012A 数据表

| 

  English

Settings

•  The Home menu will not appear if you do not 

configure the initial settings.

•  The OSD (On Screen Display) may change in this 

product after you upgrade the software version.

•  The access steps may differ depending on the 

menu you selected.

1. 

Turn on your TV after connecting the product, and 

then turn on the product. When you turn on the 

product for the first time, the product automatically 
displays the Initial Settings Language screen.

2. 

Press the ▲▼ buttons to select the desired 

language, and then press the v button. 

3. 

Press the v button to start function setup.

Previous  "

 Select

Initial Settings

TV Aspect and Network will be set.
Each setting may be changed later under "Settings".

Start

4. 

The TV Aspect screen appears. Press the ▲▼ 

buttons to select desired a TV Aspect ratio, and 

then press the v button. 

You have four choices: 

16:9 Original - For widescreen TVs. Displays 

widescreen pictures in their original 16:9 format and 

4:3 pictures (the old, standard format) in 4:3 pillar 

box format with black bars on the left and right. 

16:9 Full - For widescreen TVs. Displays widescreen 

pictures in their original 16:9 format and expands 4:3 

pictures to fill the 16:9 screen. 

4:3 Letter Box - For older, standard screen 

analogue TVs. Displays 4:3 pictures in full screen 

and 16:9 pictures in letter box format that retains 

the 16:9 aspect ratio but puts black bars above and 

below the picture. 

4:3 Pan-Scan - For older, standard screen analogue 

TVs. Displays 4:3 pictures in full screen and 16:9 

pictures in Pan-Scan format that fills the screen, but 

cuts off the left and right sides of the picture and 

enlarges the middle vertically.

5 . 

The 

Network - Wired screen appears.

 - If you have a network with dynamic IP addresses 

- and most people do - select 

Auto, press the 

 button, and then go to Step 6. 

 - If you have a network with static IP addresses, 

we suggest you select 

Skip by pressing the 

BLUE (D) button, and then go to "Configuring 

Your Network Connection" on page 20 after you 

have completed the initial setup. "Configuring 

Your Network Connection" provides a full 

explanation of how to configure your network 

connection manually.

 - If you have no network, select 

Skip by pressing 

the 

BLUE (D) button. The Initial Settings 

Complete screen appears, and then the Home 

screen appears.

| NOTES |

 

If you skip network setup here or the setup does 

not work correctly, you can go to "Configuring Your 

Network Connection" on page 20 to set up the 

product's network connection later.

Previous

 

Skip  < Move  " Select

Initial Settings I Network - Wired

Choose the method to configure Internet Protocol (IP).
Please make sure that the Ethernet cable is connected.

Auto : Configure IP automatically.

Auto

Manual

6. 

The product verifies the network connection and 

then connects to the network. When it is done, 

press the v button. The Initial Settings Complete 

screen appears, and then the Home screen 

appears.

Select

Initial Settings I Network - Wired

  MAC Address (d0:66:7b:dc:28:fc)
  IP Address, Subnet Mask, Gateway, DNS Server
  Gateway Ping
  Internet Service Test

  Your network is operating properly.
   If you still have a network problem, contact your network service provider.

OK