CHIPDRIVE 905463 数据表
CHIPDRIVE® Time Recording
50
6 CHIPDRIVE® Fingerprint C2
6.1 Device Description
6.1.1 Overview
The CHIPDRIVE® Fingerprint C2 terminal is a wall-mounted device designed for use with CHIPDRIVE®
Time Recording. It connects to a PC Time Clock Server installation via the corporate network (LAN). Its
power supply is a USB cable that can be connected either to a computer or to the provided power
supply unit. Users are identified by person number, fingerprint, contactless chip, and PIN. Fingerprint
and chip can be used as sole identification criteria. The person number cannot be used as sole criterion.
Time Recording. It connects to a PC Time Clock Server installation via the corporate network (LAN). Its
power supply is a USB cable that can be connected either to a computer or to the provided power
supply unit. Users are identified by person number, fingerprint, contactless chip, and PIN. Fingerprint
and chip can be used as sole identification criteria. The person number cannot be used as sole criterion.
The terminal includes a voice feature for success and error messages as well as instructions on how to
capture fingerprints.
capture fingerprints.
The supported clocking types are IN (with or without project number), OUT, and Change Project (= Out
+ project number). New entries are retrieved within seconds from the PC Time Clock Server installation,
and displayed in CHIPDRIVE Time Recording. The following figure depicts the device controls and feature
units:
+ project number). New entries are retrieved within seconds from the PC Time Clock Server installation,
and displayed in CHIPDRIVE Time Recording. The following figure depicts the device controls and feature
units: