Nextel comm Modem IR1200 用户手册
iR1200 Modem
60
nextel.com
Mobile IP Activation
The modem makes use of mobile IP to manage a truly mobile computer. You
may use a Mobile IP stack on the computer or use the Mobile IP stack built into
the modem.
By default, the modem is configured to work with a third-party stack. If you
desire this mode of operation, skip ahead to the “Configure Encryption
Settings”. Otherwise, you must activate the Mobile Node functionality within
the modem as well the security-related parameters.
NOTE: The Data Terminal Equipment (DTE) uses a TCP/IP stack to format
the data message with standard TCP/IP protocols used on the Internet. The
iR1200 modem does not have a TCP/IP stack. The “mobile-IP stack”
capability of the iR1200 is required to transmit data on the iDEN network.
capability of the iR1200 is required to transmit data on the iDEN network.
AT Command
Modem Mobile IP Control
Command Syntax
AT+WV300=1 (activate)
AT+WV300=0 (deactivate)
AT+WV300=0 (deactivate)
Expected Return Code(s)
OK
Mobile IP Home Agent Address
You must supply the IP address for the Home Agent. This is accomplished by
applying the following command
AT Command
MIP Home Agent Address
Command Syntax
AT+WV305=XXX.XXX.XX
(Insert appropriate IP address
(Insert appropriate IP address
where X appears.)
Expected Return Code(s)
OK
Mobile IP Authentication Key
The Mobile IP Authentication Key is used as a PIN number to validate your
Mobile IP connection with the Home Agent.