Samsung SCS-26UC4 用户手册

PWR

Power

Solid blue: normal

No light: abnormal

SYS

System 

connected

Solid blue: normal

Blinking red: establishing 

an initial network 

connection

Solid red: abnormal

GPS

GPS Signal

Solid blue: normal (GPS 

signal is received)

Blinking blue or red: 

while searching for GPS 

signal

Solid red: abnormal 

(GPS signal cannot be 

received, the external 

GPS antenna is required)*

WAN

WAN (Ethernet 

connection)

Solid blue: normal 

Blinking blue: data 

communication

No light: abnormal

5.  Allow 3 - 5 minutes for the base station 

to complete the startup sequence and 

detect both its connections and available 

communications. The first time the base 

station is used, it may take as long as one 

hour for the initial GPS acquisition.

Your Network Extender is ready for use when all 

four LEDs are solid blue.

Note: The optional GPS antenna cable is required 

only when the external GPS antenna installation 

is necessary.

What if my GPS LED is still red after one hour?
If the GPS LED is still red after one hour, you need 

to relocate the GPS antenna to receive a stronger 

signal. See “External GPS Antenna” in the User 

Guide.
How do I know my phone is connecting 

through the Network Extender?
When dialing 

#

48 on your wireless phone, an an-

nouncement will tell you if you are within range 

of the Network Extender. In addition, you will 

hear a short double tone on your wireless phone 

whenever making or receiving a call.  The tone is 

played at the beginning of the call.

Refer to the Network Extender User Guide 

•

that came with your device.
Visit verizonwireless.com/support 

•

Call Customer Service toll free at 800-922-

•

0204 or *611 from your Verizon Wireless 

mobile phone.

EP68-00361A

© 2009 Verizon Wireless.  All rights reserved.  Verizon Wireless is a 

trademark of Verizon Trademark Services LLC.

* See “External GPS Antenna” in the User Guide.

SCS-26UC4