Siemens GIGASET SX205 用户手册

下载
页码 52
20
Answering Machine
Gigaset SX205-255i / englisch / A31008-X255-B100-1-7619 / answering.fm / 09.10.2003
Answering Machine
Your ISDN telephone has three answering machines (AM1, AM2, AM3). Once you have 
connected your telephone, answering machine AM1 is shown and activated. By default, 
answering machines AM2 and AM3 are hidden. To use them, they must be shown and 
all shown answering machines must be assigned their own receive MSN. You can con-
figure AM1, AM2 and AM3 separately.
You can operate the answering machines
either directly using a registered handset (in the menu) or
by remote control (internal or external call to answering machine).
Remote control is a convenient option, allowing you day-to-day use of an answering 
machine wherever you are. To configure the answering machines, you will need a hand-
set that is registered on the base (see handset operating instructions).
Definitions of terms used below:
Operation using a registered handset
Which answering machine you can operate directly using your handset depends on the 
assignment of the receive MSNs: 
No MSN is assigned to the answering machines (factory setting):
AM1 answers all calls.
Each answering machine can be set, operated and played back from each handset/
terminal.
One or more MSNs are assigned to each answering machine:
Each answering machine can only be set and played back using handsets/terminals with 
the same receive MSN.
Exception: If a receive MSN is assigned exclusively to one answering machine, and not 
to any other handset/terminal, then this answering machine can be operated by all 
internal users.
Message
Message that a caller leaves on the answering machine.
Memos
"Spoken notes" that you can record on the answering machine for mem-
bers of your family or colleagues, for example. 
AM m
ode
Recording or announcement.
Answer and record 
mode
The caller hears an announcement and may then leave a message.
Announce only mode The caller hears your announcement but cannot leave a message.
i
If an answering machine is currently being used by one user (directly or 
by remote control), then no other user can access the answering machine 
during this time.