Garmin Fenix 快速安装指南

Select  .

Select  .

NOTE: Your body temperature affects the temperature 

sensor. To get the most accurate temperature reading, 

remove the device from your wrist and wait 20–30 minutes.
TIP: To purchase a tempe™ wireless temperature sensor, go 

to 

. See the owner's manual for more 

information.

The default sensor mode is on demand mode, which offers you 

quick access to compass, altimeter, barometer, or temperature 

data. You can also put the device in always on mode to display 

continuous sensor data.
NOTE: If you have an optional heart rate monitor or speed and 

cadence sensor paired with the device, your device can display 

continuous heart rate or speed and cadence data.

Select the Orange key.

Select Setup > Sensors > Mode > Always On.

Before you can use the GPS navigation features, such as 

recording a track, you must acquire satellite signals.
The device may need a clear view of the sky to acquire satellite 

signals. The time and date are set automatically based on the 

GPS position.

Hold   to turn on the device.

Select your language (first time only).

Select the Orange key.

Select Start GPS.

Wait while the device locates satellites.

Walk around to record a track.
Your distance and time appear.

Select   to view the loop of data pages including compass 

data, altimeter data, ascent and speed, the map, and the 

time of day page.
You can customize some data pages. See the owner's 

).

Hold 

.

Select an option:
• Select Pause Track to pause tracking.
• Select Save Track to save your track.
• Select Clear Track to erase the track without saving.
• Select Stop GPS to turn off GPS without deleting your 

track.

Select the Orange key.

Select Stop GPS.

A track is a recording of your path. The track log contains 

information about points along the recorded path, including 

time, location, and elevation for each point.

Before you go for a hike, you should charge the device 

completely (

NOTE: The device turns on automatically while charging. If you 

do not charge the device before going for a hike, hold   to turn 

on the device.

Select the Orange key.

Select Start GPS.

Wait while the device locates satellites.

Start hiking.

When you want to take a break or pause the device from 

tracking, hold 

 > Pause Track.

Hold 

 > Resume Track, and continue hiking.

When finished, hold 

 > Save Track to save your hiking 

data.

If necessary, select Yes to stop GPS.

Before you can send data to BaseCamp, you must download 

BaseCamp to your computer (

You can view your hike, other tracks, and waypoints on your 

computer.

Connect your device to your computer using the USB cable.
Your device appears as a removable drive in My Computer 

on Windows

®

 computers and as a mounted volume on Mac

® 

computers.

Start BaseCamp.

Follow the on-screen instructions.

Waypoints are locations you record and store in the device.

You can save your current location as a waypoint.

Hold the Orange key.

Select an option:
• To save the waypoint without changes, select Save.
• To make changes to the waypoint, select Edit, make 

changes to the waypoint, and select Save.

Select the Orange key.

2