IFB Appliances ELENA 用户手册

WATER INLET

DRAIN

PIPE

WATER INLET

DRAIN

PIPE

WATER 
SUPPLY

STOP
LOCK

REDUCER

MACHINE

WATER

INLET

1/2

3/4

1. Make sure there is a 16 amp. 3-pin electrical point preferably with a 16 amp.

fuse, within 1 meter of the machine. Make sure it has proper earthing.

2. Fixed plumbing is recommended for

the machine.  The  water inlet of the

machine has a collar with3/4”parallel 

internal threads. The water supply 

point with an external 3/4” parallel 

thread should be available within1 

meter of the machine’s location.

4. Please inform our service centre for installation and demonstration of the

machine once the points mentioned above have been completed.

3. Two options on the water inlet and drain

pipe connection are shown. In case these

possibilities do not exist for  the drain pipe,

please arrange an additional length of pipe.

1. Remove Carton.

2. Remove wooden base. Keep machine on  floor 

or trolley.

3. Place the machine at the site at which it is to be 

installed.

4.  Remove transit bolts.

5. Insert plastic caps provided into holes vacated and press till they click into 

place.

7. Keep transit bolts carefully. They will be required in case you need to shift the 

machine again.

8. For shifting and re-installation at a new site,please get in touch with our service 

personnel.

9. Keep packaging material carefully. It comes handy while shifting residence.

10. PLEASE DO NOT OPERATE THE MACHINE TILL TRANSIT BOLTS HAVE BEEN 

REMOVED.

4