Whirlpool WGD9750WW 用户手册

Use Manual Cycles to select a specific amount of drying time and 
a drying temperature. When a Manual Cycle is selected, the 
Estimated Time Remaining display shows the actual time 
remaining in your cycle. You can change the actual time in the 
cycle by pressing the ADJUST MANUAL DRY TIME up or down 
buttons and the temperature by pressing the Temperature button.

 

TIMED DRY 

 

Heavyweight items, 

 

bulky items, bedspreads, 
work clothes

High

40

 

Small loads

Medium

15

*Reset time to complete drying, if needed.

Use Timed Dry/Air Only temperature setting for items that require 
drying without heat such as rubber, plastic, and heat-sensitive 
fabrics. This chart shows examples of items that can be dried 

 

using Air Only.

Foam rubber - pillows, padded bras, stuffed toys

20 - 30

Plastic - shower curtains, tablecloths

20 - 30

Rubber-backed rugs

40 - 50

Olefin, polypropylene, sheer nylon

10 - 20

*Reset time to complete drying, if needed.

■

Check that coverings are securely stitched.

■

Shake and fluff pillows by hand periodically during the cycle.

■

Dry item completely. Foam rubber pillows are slow to dry.

NOTE: Automatic Cycles are not available when using the Air Only 
setting.

In these cycles, a small amount of water is sprayed into the dryer 
drum after several minutes of tumbling with heat. The STEAM 
Status Light will come on while the water is sprayed into the drum. 
The dryer will continue to tumble at Medium heat for the duration 
of the cycle. The Steam Cycles include Quick Refresh and 
Enhanced Touch Up. The cycle time is adjustable for the Quick 
Refresh Cycle based on the Number of Garments selected. The 
heat setting and cycle time may be adjusted for the Enhanced 
Touch Up Cycle.
NOTE: Results may vary depending on fabric. 100% cotton 
garments with wrinkle-free finish may yield better results than 

 

those without.

Use of a fabric softener sheet is not recommended with steam 
cycles as it may cause temporary staining on the clothes.

 

 

Helps to smooth out wrinkles 
and reduce odors. Estimated 
Time Remaining based on 
Number of Garments 
selected.

Medium

12-29

ENHANCED TOUCH UP 

 

Helps to smooth out wrinkles 
in loads left in the dryer for 
an extended period.

Medium

20

*To program the Quick Refresh Cycle, turn the selector knob to 

“Quick Refresh.” Use a combination of buttons by pressing 
NUMBER OF GARMENTS and selecting 1-4, 5-8, or 9-12 
garments. Pressing ADJUST MANUAL DRY TIME options + or - 
to manually increase by increments of 1. Number of Garments 
will display in the Estimated Time Screen. Cycle time will be 
displayed when Start is pressed.

*The Enhanced Touch Up Cycle has a minimum dry time of 

15 minutes and a maximum dry time of 40 minutes. Only the 
Medium and High temperature settings can be used for the 
Enhanced Touch Up Cycle.

An option that can be added to any Auto Cycle to Reduce Static 
that may build up in loads as they tumble. The Reduce Static 
feature periodically tumbles, stops, and sprays a small amount of 
water over the load to help keep static from forming.
NOTE: By pressing REDUCE STATIC, your cycle will add 
miniminal extra time.

When you are unable to remove a load of clothes from the dryer 
as soon as it stops, wrinkles can form. The WRINKLE SHIELD™ 
STEAM feature periodically tumbles, rearranges, and fluffs the 
load to help keep wrinkles from forming.

■

Get up to 140 minutes of periodic tumbling at the end of a 
cycle. Turn off at any time by pressing the WRINKLE 
SHIELD™ STEAM button.

■

After 60 minutes of WRINKLE SHIELD™ STEAM operation, a 
short 15 minute Steam cycle is used to smooth out wrinkles.