M-S Cash Drawer A794 用户手册
A794 Owner’s Guide
Chapter 6: Programming Information
December 1999
89
Character Width Selection
Hex
Hex
Decimal
Width
00
0
1 (normal)
10
16
2 (two times width)
20
32
3 (three times width)
30
48
4 (four times width)
40
64
5 (five times width)
50
80
6 (six times width)
60
96
7 (seven times width)
70
112
8 (eight times width)
Character Height Selection
Hex
Hex
Decimal
Height
00
0
1 (normal)
01
1
2 (two times height)
02
2
3 (three times height
03
3
4 (four times height)
04
4
5 (five times height)
05
5
6 (six times height)
06
6
7 (seven times height)
07
7
8 (eight times height)
This command is effective for all characters (except for HRI characters).
In Standard Mode, the vertical direction is the paper feed direction, and the horizontal
direction is perpendicular to the paper feed direction. However, when character
orientation changes in 90 degree clockwise-rotation mode, the relationship between
vertical and horizontal directions is reversed.
direction is perpendicular to the paper feed direction. However, when character
orientation changes in 90 degree clockwise-rotation mode, the relationship between
vertical and horizontal directions is reversed.
In Page Mode, vertical and horizontal directions are based on the character orientation.
When characters are enlarged with different sizes on one line, all the characters on the
line are aligned at the baseline.
When characters are enlarged with different sizes on one line, all the characters on the
line are aligned at the baseline.
The Select Print Mode (1B 21 n) command can also select or cancel double-width and
double-height modes. However, the setting of the last received command is effective.
double-height modes. However, the setting of the last received command is effective.
Exception
If n is out of the defined range, this command is ignored.
Related Information
In A793 Emulation, this command is discarded and not put into print buffer.