Panasonic Arbitrator 360 操作指南

下载
页码 147


Operations
.(continued)
Recording
You can record not only the main video, but also the 
main and sub videos simultaneously. As sub videos, 
video signals from one camera, as well as those from 
4 cameras, can be recorded in QUAD or PANORAMA 
size.
(See "Switching and Adjusting Display Mode," 
Starting.and.stopping.recording
Starting.recording
Click.on.[REC]..
The [REC] lamp on the color camera will light. 
While recording, "REC" is indicated on the display, and 
a red frame appears around the video.
Note
It is possible to disable the [REC] lamp. 
(See "Turning off the [REC] lamp of the color camera 
during recording," page 61.)
To.start.recording.upon.power-on
Recording starts upon power-on if PowerOn Rec is set 
to ON on the Rec/Play screen in Administrator Setup. 
To.stop.recording
Click.on.[STOP]..
Recording stops. 
Setting.the.classify.information
The Classify input screen is displayed when you click 
on the [STOP] button if the following settings are made 
on the Rec/Play screen in Administrator Setup and the 
classify tags have been registered in the Front-End 
application or the Memory Card Video Recorder: 
Setting of Force Classify: FORCE or ENABLE 
(See "Classify," page 104.)
Setting of Loop Rec: OFF  
1.. Select.a.classify.tag.from.the.dropdown.
list..
2.. Enter.a.note.for.classify.information.in.the.
Note field. 
3.. Click.on.[OK]..
To.close.the.screen.without.entering.classify.
information
You can close the Classify screen without entering 
classify information if Force Classify is set to ENABLE. 
Click on [Cancel]. Then the classify information is not 
entered.