Panasonic Arbitrator 360 操作指南
Administrator.Setup
.(continued)
Auto.Focus
Set the focusing method of the color camera in the
following conditions:
•
When "Init LPR Mode" is set to "DISABLE"
•
When "Init LPR Mode" is set to "ENABLE" and "LPR
Mode" is set to "PATROL"
•
When recording is started by a recording trigger signal
with "Init LPR Mode" set to "ENABLE" and "LPR
Mode" set to "LPR"
PRESET: When the zoom magnification is set to
×3 or less, the camera focuses on an object at
about 15 m distance from the camera. If zooming
operation is performed afterward, automatic
focusing will be activated.
DISABLE: The focal position is fixed at a distance
of about 40 m, and automatic focus is disabled.
AUTO: Automatic focus is enabled.
Init.Camera1.Settings.after.power.ON.
Perform the initial settings for the color camera that
is connected to the [CAMERA 1] connector on the
Memory Card Video Recorder.
Init.Backlight
Set if the backlight compensation is On or Off.
ON: The function is enabled.
OFF: The function is disabled.
LAST: The setting upon the last power-off will be
OFF: The function is disabled.
LAST: The setting upon the last power-off will be
restored. If the Memory Card Video Recorder
is not turned off properly, the setting data upon
power-off may not be stored properly.
Init.IR.Mode
Set if the IR function is On or Off.
ON: The function is enabled.
OFF: The function is disabled.
AUTO:
OFF: The function is disabled.
AUTO:
The function is automatically turned ON or OFF.
LAST: The setting upon the last power-off will be
restored. If the Memory Card Video Recorder
is not turned off properly, the setting data upon
power-off may not be stored properly.
Init.Camera1.LED
Set if the [REC] lamp of the color camera is lit or not
during recording.
ON: The lamp lights.
OFF: The lamp does not light.
LAST: The setting upon the last power-off will be
OFF: The lamp does not light.
LAST: The setting upon the last power-off will be
restored when the camera is turned on. If the
Memory Card Video Recorder is not turned off
properly, the setting data upon power-off may not
be stored properly.