BMW 2015 428i Gran Coupe 业主指南
row 1 and the inner part onto the centering
component, arrow 2. Make sure that the
tail lamp engages in the rubber mount.
component, arrow 2. Make sure that the
tail lamp engages in the rubber mount.
4.
Screw the tail lamp on with the two nuts.
5.
Insert and secure the cover. Make sure that
the tubular seal is not pinched.
the tubular seal is not pinched.
Lights in the tailgate
General information
Reversing lights: 16-watt bulb, PW16W.
Inner brake lights: 21-watt bulb, H21W
Inner brake lights: 21-watt bulb, H21W
Accessing the lights
Slide the cover outwards, arrow, and remove.
Replacing the reversing lamp and inner
brake lamp
brake lamp
1.
Loosen the bottom holder, arrow 1.
2.
Loosen the top holder, arrow 2. To do so,
press in the middle latch and then press
out both outside latches.
Remove the lamp holder, arrow 3.
press in the middle latch and then press
out both outside latches.
Remove the lamp holder, arrow 3.
3.
Unscrew the defective bulb of the revers‐
ing or brake lamp from its socket counter‐
clockwise.
ing or brake lamp from its socket counter‐
clockwise.
4.
Insert the new bulb.
Installing the bulb holder
1.
Insert the two contacts, arrow 1, into the
connections, arrow 2.
connections, arrow 2.
2.
Press on the bulb holder, arrow 3. Make
sure that the two exterior holders latch into
place.
sure that the two exterior holders latch into
place.
3.
Place the cover back in position and slide it
inwards.
inwards.
Rear lamp, license plate lamp and
central brake lamp
.
Seite 214
Mobility
Replacing components
214
Online Edition for Part no. 01 40 2 960 707 - II/15