Tandberg Data Data Tool Storage T40 用户手册
3
3 If your library includes fibre channel tape drives connect the fibre
cables to the tape drives:
a. Attach one end of the fibre cable to the fibre port on each
drive. Attach the other end of the cable to the host, switch or
hub.
hub.
4 Connect your Ethernet cable to the Ethernet port on the rear of
the library. The Ethernet connection allows use of the Web
Client.
Client.
5 Connect a power cord to the power connector on the rear of the
library. US and EU power cords are supplied with the library.
6 Power on the library by turning on the rear power switch.
7 If the library is a tabletop version, the library detects that the
locking screws are present. Follow the instructions on the front
panel display to remove the magazines to get access to the
screws. Remove the screws and reinsert the magazines. The
library will now continue its power-on sequence.
panel display to remove the magazines to get access to the
screws. Remove the screws and reinsert the magazines. The
library will now continue its power-on sequence.
8 Power up the host system.
9 Verify that each host can communicate with the library’s tape
drives.
10 Configure your library using the library’s operator panel.