Behringer Europower PMP960M 产品宣传册
Page 2 of 7
8 high-quality mic preamps with
switchable +48 V phantom power for
condenser microphones
switchable +48 V phantom power for
condenser microphones
Effective, extremely musical 3-band
EQ, switchable Pad and Clip LEDs on
all mono channels
EQ, switchable Pad and Clip LEDs on
all mono channels
Selectable stereo (main L/R), double
mono (main/monitor) or bridged
mono amplifier operation mode
mono (main/monitor) or bridged
mono amplifier operation mode
Adjustable stereo Aux input for
connecting external signal sources
connecting external signal sources
Common Features
Ultra-compact design at nearly half
the depth and weight of
conventional powered mixers means
no more lugging around dead weight
the depth and weight of
conventional powered mixers means
no more lugging around dead weight
Revolutionary amplifier technology:
enormous power, incredible sonic
performance and super-light weight
enormous power, incredible sonic
performance and super-light weight
FBQ Feedback Detection system
instantly reveals critical frequencies
for easy feedback removal
instantly reveals critical frequencies
for easy feedback removal
Standby switch mutes all input
channels during breaks while
background music is provided via
tape inputs
channels during breaks while
background music is provided via
tape inputs
Dual 7-band graphic EQ allows
precise frequency correction of
monitor and main outputs
precise frequency correction of
monitor and main outputs
Voice Canceller function removes
singer’s voice from recordings for
Karaoke applications
Karaoke applications
Speaker Processing function adjusts
frequency response to match
professional speaker systems like
BEHRINGER EUROLIVE series, etc.
frequency response to match
professional speaker systems like
BEHRINGER EUROLIVE series, etc.
Plus with the built-in 24-bit
FX processor, you get 100 mind-blowing
digital effect presets such as delay,
chorus and reverb you can apply to any
channel, as well as to the monitors and
main output. No outboard gear needed
— and the PMP980S comes with dual
FX processors for double the effects!
digital effect presets such as delay,
chorus and reverb you can apply to any
channel, as well as to the monitors and
main output. No outboard gear needed
— and the PMP980S comes with dual
FX processors for double the effects!
Both of these mixers come equipped
with our amazing FBQ Feedback
Detection System, which automatically
pinpoints trouble frequencies so you
can snuff them out before you—or the
audience—go deaf. Just touch a button
and watch as trouble frequencies are
indicated by red LEDs on the 7-band
graphic EQ—one for the Mains, one for
the Monitors.
Detection System, which automatically
pinpoints trouble frequencies so you
can snuff them out before you—or the
audience—go deaf. Just touch a button
and watch as trouble frequencies are
indicated by red LEDs on the 7-band
graphic EQ—one for the Mains, one for
the Monitors.
The Ins and Outs
The PMP980S and PMP960M give you
loads of flexibility in accommodating
whatever the center of attention happens
to be. Channels 1-6 of both mixers are
for mics, bass guitars or other mono
instruments. The PMP980S features stereo
channels 7-8 and 9-10, complete with
IMP mic preamps, so you can use them
for mono/stereo instruments, or for up
to 8 mics. Now that’s flexibility!
whatever the center of attention happens
to be. Channels 1-6 of both mixers are
for mics, bass guitars or other mono
instruments. The PMP980S features stereo
channels 7-8 and 9-10, complete with
IMP mic preamps, so you can use them
for mono/stereo instruments, or for up
to 8 mics. Now that’s flexibility!
In the bottom right corner of the
mixer, you’ll find the FX, INPUT TO
MAIN and OUTPUT sections. The FX
section features a FOOTSW(itch) input.
This lets you connect a dual footswitch
like the AB200 so you can remotely
engage/bypass the internal FX processors.
FX OUT 1 & 2 can be used to connect up
to two outboard effects processors.
MAIN and OUTPUT sections. The FX
section features a FOOTSW(itch) input.
This lets you connect a dual footswitch
like the AB200 so you can remotely
engage/bypass the internal FX processors.
FX OUT 1 & 2 can be used to connect up
to two outboard effects processors.
The AUX IN 1/4" inputs in the INPUT
TO MAIN section allow you to route
an external stereo signal (such as a
drum machine ), to the main mix on
an external stereo signal (such as a
drum machine ), to the main mix on
the PMP980S—the AUX input on
the PMP960M provides the same
functionality, except with a mono signal.
The AUX IN control adjusts the volume
of the external signal in the main mix.
Use the 2TR IN RCA inputs to feed in
external stereo signals from CD players
or tape decks. The VOICE CANCELLER
switch allows you to eliminate the
vocals from pre-recorded music for
karaoke applications.
the PMP960M provides the same
functionality, except with a mono signal.
The AUX IN control adjusts the volume
of the external signal in the main mix.
Use the 2TR IN RCA inputs to feed in
external stereo signals from CD players
or tape decks. The VOICE CANCELLER
switch allows you to eliminate the
vocals from pre-recorded music for
karaoke applications.
In the OUTPUT section,
the REC OUT RCA outputs send
line-level signals from the mixer to a
recording device, so you can finally
get to work on that triple-live album
you’ve always dreamed of. The MAIN
1/4" connectors are provided for situations
where you might want to connect to an
external power amp, or if you need to
feed the main output signal to active
loudspeakers, say in a church cry room
or to your business’ lobby. Connect your
monitor power amps or active monitor
speakers to the MONITOR output.
line-level signals from the mixer to a
recording device, so you can finally
get to work on that triple-live album
you’ve always dreamed of. The MAIN
1/4" connectors are provided for situations
where you might want to connect to an
external power amp, or if you need to
feed the main output signal to active
loudspeakers, say in a church cry room
or to your business’ lobby. Connect your
monitor power amps or active monitor
speakers to the MONITOR output.
Channel your inner sound guru
You’ll be operating this mixer like
it’s second nature thanks to its simple,
intuitive layout. Each channel has a
three-band EQ (HIGH, MID, LOW) blue;
MON(itor) level in bright blue; FX1 in
red; FX2 in orange (PMP980S only); PAN
in black (only PMP980S); LEVEL in white.
There’s also a switchable PAD and CLIP
LED per channel.
intuitive layout. Each channel has a
three-band EQ (HIGH, MID, LOW) blue;
MON(itor) level in bright blue; FX1 in
red; FX2 in orange (PMP980S only); PAN
in black (only PMP980S); LEVEL in white.
There’s also a switchable PAD and CLIP
LED per channel.
Once you’ve set the levels on
individual channels, it’s easy to create
your MAIN and MONITOR mixes. Both
the MAIN and MONITOR sections feature
7-band graphic EQs, with our proprietary
FBQ Feedback Detection System to
help you adjust the sound to your
room’s acoustics.
your MAIN and MONITOR mixes. Both
the MAIN and MONITOR sections feature
7-band graphic EQs, with our proprietary
FBQ Feedback Detection System to
help you adjust the sound to your
room’s acoustics.
Continued on next page
EUROPOWER
PMP980S
PMP960M