Whirlpool Clothes Dryer W10260038A 用户指南

On some models, select Drum Light to turn on the light inside the 
dryer drum. During a cycle, if Drum Light is selected, the drum 
light turns on and will remain on until DRUM LIGHT is pressed 
again, the door is opened and closed, or the door is left open for 
5 minutes.
When the dryer is not running, the drum light will turn on when 
DRUM LIGHT is pressed or the dryer door is opened, and it will 
remain on until the dryer door has been open for 5 minutes, the 
dryer door is closed or DRUM LIGHT is pressed again. 
Press DRUM LIGHT at any time to turn the drum light ON or OFF.

The WRINKLE SHIELD™ setting helps keep wrinkles from forming 
when you cannot unload the dryer promptly at the end of a cycle. 
During this option, the dryer stops tumbling and then tumbles 
again for a brief period.

■

Press the WRINKLE SHIELD™ setting to get up to 
120 minutes of heat-free, periodic tumbling at the end of a 
cycle.

■

Stop the WRINKLE SHIELD™ setting at any time by pressing 
WRINKLE SHIELD™ setting or opening the dryer door.

■

For the Perm Press/Casual Cycle, the WRINKLE SHIELD™ 
setting is preset to ON. The other Automatic Cycles will retain 
the WRINKLE SHIELD™ setting. For example, if you select the 
WRINKLE SHIELD™ setting in the Normal cycle, the 
WRINKLE SHIELD™ setting will be on the next time you 
select the Normal cycle.

NOTE: If you do not select the WRINKLE SHIELD™ setting, the 
dryer stops after cool down.

Select the Damp Dry Signal to alert you that your clothes are 
approximately 80% dry. This is useful when you want to remove 
lightweight items in a mixed load to avoid overdrying or remove 
partially dry items that may need ironing.
The Damp Dry Signal is useful when drying bedsheets/linens in a 
mixed load. When the signal goes off, open the door to stop the 
dryer, rearrange the load inside the dryer, close the door and 
restart the dryer to finish the drying cycle. Rearranging the load 
will aid in the drying process.
NOTE: The Damp Dry Signal is available only with the Automatic 
Cycles.

The End of Cycle Signal produces an audible sound when the 
drying cycle is finished. Promptly removing clothes at the end of 
the cycle reduces wrinkling.
Press END OF CYCLE SIGNAL until the desired volume (Loud, 
Soft, or Off) is selected.
NOTE: When the WRINKLE SHIELD™ setting is selected and the 
End of Cycle Signal is on, a tone sounds every 5 minutes until the 
clothes are removed, or the WRINKLE SHIELD™ setting ends.

Follow the progress of your dryer with the drying Status indicator 
lights.

■

In an Automatic Cycle, the Sensing light illuminates until a wet 
item is detected.

■

In the Timed Cycle, the Sensing light illuminates at the 
beginning of a cycle and turns off 5 minutes into the cycle.

The Wet light illuminates at the beginning of an Automatic Cycle if 
a wet item is detected.

■

In an Automatic Cycle, if a wet item is not detected after 
approximately 5 minutes, the dryer goes directly into Cool 
Down and the Cool Down and the WRINKLE SHIELD™ 
setting indicators illuminate, if selected.

■

In a Timed Cycle, wet items are not detected. The dryer will 
continue to run for the length of time selected, and the Wet 
light will illuminate. The damp light will not illuminate.

■

In the Enhanced Touch Up or the Quick Refresh Steam Cycles 
(on some models), the Wet light comes on after the water has 
been sprayed into the drum, 5-6 minutes into the cycle. The 
Wet light illuminates until the dryer goes into Cool Down with 
1 minute of time remaining.

The Damp light illuminates in an Automatic Cycle when the 
laundry is approximately 80% dry. Damp Dry Signal beeps, if 
selected. See “Options.”

The Cool Down light illuminates during the cool down part of the 
cycle. Laundry cools for ease in handling.

The Done light illuminates when the drying cycle is finished. This 
indicator stays on during the WRINKLE SHIELD™ setting.

The WRINKLE SHIELD™ setting light illuminates when this option 
is selected. This indicator stays on during the WRINKLE 
SHIELD™ setting.