Whirlpool MED9600SQ0 用户手册

Gather the required tools and parts before starting installation. 
Read and follow the instructions provided with any tools listed 
here. 

Remove parts packages from dryer drum. Check that all parts are 
included.

NOTE: Do not use leveling legs if installing the dryer on a 
pedestal.

Check local codes. Check existing electrical supply and venting. 
See “Electrical Requirements” and “Venting Requirements” 
before purchasing parts.

■

For close-clearance installations between 31.5" (80.01 cm) 
and 37" (93.98 cm), see “Plan Vent System” section for 
venting requirements.

Mobile home installations require metal exhaust system hardware 
available for purchase from the dealer from whom you purchased 
your dryer. For further information, please refer to the “Assistance 
or Service” section of this manual.

Are you placing the dryer on a pedestal? You have the option of 
purchasing a pedestal separately for this dryer. You may select a 
15.5" (39.4 cm) pedestal. This pedestal will add to the total height 
of the dryer for a total height of approximately 53.5" (135.9 cm).

For a garage installation, you will need to place the pedestal at 
least 3.5" (8.9 cm) above the floor. 

To order, call the dealer from whom you purchased your dryer or 
refer to the “Assistance or Service” section of this manual. 

Are you planning to stack your washer and dryer? To do so, you 
will need to purchase a Stack Kit.

To order, call the dealer from whom you purchased your dryer or 
refer to the “Assistance or Service” section of this manual. Ask 
for Part Number 8212640.

■

Flat-blade screwdriver

■

#2 Phillips screwdriver

■

Adjustable wrench that 
opens to 1" (2.5 cm) or 
hex-head socket wrench 
(for adjusting dryer feet)

■

Wire stripper (direct wire 
installations)

■

Level

■

Vent clamps

■

Caulking gun and 
compound (for installing 
new exhaust vent)

■

Tin snips (new vent 
installations)

■

¼" nut driver 
(recommended)

■

Tape measure

White

WHP1500SQ

Black

WHP1500SB