Whirlpool SUDS-MISER 6ALSS5233JQ0 用户手册

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you
what can happen if the instructions are not followed.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all
safety messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or
“WARNING.” These words mean:

■  

Read all instructions before using the washer.

■

Do not wash articles that have been previously

cleaned in, washed in, soaked in, or spotted with 
petrol, dry-cleaning solvents, other flammable, or 
explosive substances as they give off vapours 
that could ignite or explode.

■  

Do not add petrol, dry-cleaning solvents, or other 

flammable, or explosive substances to the wash 
water. These substances give off vapours that 
could ignite or explode.

■

Under certain conditions, hydrogen gas may be 

produced in a hot water system that has not been 
used for 2 weeks or more. HYDROGEN GAS IS 
EXPLOSIVE. If the hot water system has not 
been used for such a period, before using the 
washing machine, turn on all hot water taps and 
let the water flow from each for several minutes. 
This will release any accumulated hydrogen gas. 
As the gas is flammable, do not smoke or use an 
open flame during this time.

■

Do not allow children to play on or in the washer. Close 

supervision of children is necessary when the washer 
is used near children.

■

Before the washer is removed from service or 

■

Do not reach into the washer if the drum, tub or agitator 

is moving.

■

Do not install or store the washer where it will be ex- 

posed to the weather.

■

Do not tamper with controls.

■

Do not repair or replace any part of the washer or 

attempt any servicing unless specifically recommended 
in this Use and Care Guide or in published user-repair 
instructions that you understand and have the skills to 
carry out.

■

See Installation Instructions for grounding 

requirements.

To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic 

precautions, including the following:

discarded, 

remove the door or lid.

If the supply cord is damaged, it must be replaced by 
the manufacturer or its service agent or a similarly qual-
ified person in order to avoid a hazard.

■