Whirlpool DU960 用户手册

Select this option to raise the water temperature in the final rinse 
to approximately 155°F (68°C) for 10 minutes. The SANI RINSE 
option adds heat and time to the cycle. In the Pots & Pans and 
Heavy Wash cycles, this high-temperature rinse sanitizes your 
dishes and glassware in accordance with the NSF Protocol P153 
Sanitization and Cleaning Performance of Household Spray-Type 
Dishwashers.

Use the SANI RINSE option with the Pots & Pans and 

Heavy Wash cycles.

Select this option to dry dishes without heat and save energy. 
The dishes take longer to dry and some spotting can occur.

For best drying, use a liquid rinse aid. Some items (such as 
plastics) may need towel drying.

 The dishwasher automatically heats the air in the 

dishwasher during the “dry” portion of the cycle unless you 
select Air Dry.

Use Delay Hours to run your dishwasher at a later time or during 
off-peak hours. You can add items to the load anytime during the 
delay countdown. After adding items, close the door firmly until it 
latches. The delay countdown will not continue if the door is not 
latched.

Close the door.

Press Delay Hours 1 time for a 2-hour delay, 2 times for a 4-
hour delay, or 3 times for a 6-hour delay.

Select a wash cycle and option.

The number glows above Delay Hours. The dishwasher starts the 
cycle in the selected number of hours. If you do not press a cycle 
within 30 seconds, the Delay Hours indicator turns off.

■

To cancel the delay and cycle, press Cancel/Drain.

■

To cancel the delay and start the cycle, press Delay Hours 
until “6” glows. Then press Delay Hours one more time. The 
delayed cycle starts.

Follow the progress of your dishwasher with the Cycle Status 
Indicators. 

: Your model may have some or all of these indicators.

Your dishwasher senses the soil level on the dishes. Soil level 
determines the length of some cycles, the amount of heat added 
to the wash or rinse, and the cycle needed for the load. Sensing 
glows during the soil sensing parts of the cycle. Wash action 
continues while sensing occurs.

Heat Water glows whenever water is heated during a cycle. Wash 
or rinse action continues as the water heats.

Clean glows when a cycle is finished. The light turns off when you 
open the door or press Cancel/Drain.

If you select the SANI RINSE™ option, Sanitized glows when the 
SANI RINSE cycle is finished. If your dishwasher did not properly 
sanitize your dishes, the light flashes at the end of the cycle. This 
can happen if the cycle is interrupted. The light goes off when 
you open the door.

Use Locked to prevent unintended use of the dishwasher. You 
can also use the Locked feature to prevent unintended cycle or 
option changes during a cycle.

 When Locked is lit, all buttons are disabled. 

To lock the controls
Press and hold

for 5 seconds. Locked glows. If you press any pad while your 
dishwasher is locked, the light flashes 3 times.

To unlock the controls
Press and hold Air Dry for 5 seconds until the light turns off. 

 The dishwasher door can be opened while the controls 

are locked.