Westinghouse EPA (49 state) and CARB (50 state) WH3250C 业主指南

OPERATION

OTE:

If the engine fails to start after 5 seconds,

release the engine control switch. Let the

generator sit idle for 15 seconds and then

repeat step 5. If the cranking speed drops

after each unsuccessful attempt, then the

battery may not be adequately charged.

Manually start the generator as instructed

in Manually Starting a Generator on page

23.

OTE:

The electric start generator is equipped

with a battery charging feature. Once

the engine is running, a small charge is

supplied to the battery via the battery

cables and will slowly recharge the battery.

STOPPING THE GENERATOR

Normal Operation

During normal operation, use the following steps to stop

your generator:

1. Remove any connected loads from the control

panel receptacles.

2. Allow the generator to run at “no load” to reduce

and stabilize engine and alternator temperatures.

3. Push the engine control switch to the

OFF position.

4. Turn the fuel shutoff valve to the

OFF position.

During an Emergency

If there is an emergency and the generator must be

stopped quickly, push the engine control switch to the

OFF position immediately.