Westinghouse WP2700 业主指南
![Westinghouse](https://files.manualsbrain.com/attachments/7b2eb7800439d26610fa128dc92f44f83bef4521/common/fit/150/50/e563040985de360144ef837240a3e388b0511a066c4c4efb9eb3056b1bcc/brand_logo.png)
39
MAINTENANCE
1
2
Figure 54 – Pump/Engine Mounting Bolts
1 - Pump/Engine
Mounting
Mounting
Bolts
2 - Engine
Crankshaft
Crankshaft
4. Apply a thin layer of grease to the crankshaft before
installing the pump.
5. Inspect the key and keyway on crankshaft (see
Figure 55).
Figure 55 – Key and Crankshaft Keyway
6. Slide the pump onto the crankshaft making sure the
key lines up with the keyway in the pump.
7. Install the pump/engine mounting bolts and tighten
to 25 ft-lb (34 N·m).
Remove and Install the Pump – WP3000
1. Disconnect high-pressure hose and soap siphon
hose from pump.
2. Remove the 4 mounting bolts and washers holding
the pump to the engine (see Figure 56).
3. Slide the pump out off of the crankshaft (see Figure
56).
Figure 56 – Pump Mounting Bolts
4. Inspect the key and keyway on crankshaft (see
Figure 57).
5. Apply a thin layer of grease to the crankshaft before
installing the pump.
Figure 57 – Key and Crankshaft Keyway
6. Slide the pump onto the crankshaft making sure the
key lines up with the keyway in the pump.
7. Install the pump/engine mounting bolts and tighten
to 30 ft-lb (41 N·m).