Heartland Vent Closure 21000 产品宣传页

下载
页码 1
Dear Dryer Vent Purchaser, 
 
Your purchase of this Energy Saving Dryer Vent Closure
TM
 demonstrates that 
you are concerned about saving energy!  This energy saving vent can be 
installed in any standard vent opening. (Please read all instructions before 
beginning installation.) 
 
INSTRUCTIONS 
 
1. ASSEMBLE
Insert the smooth edge of the plastic elbow into the bottom of the plastic vent body.  
Set aside. 
2.  PREPARE VENT OPENING
Remove the old hood and flapper of the existing dryer vent by removing screws or 
cutting with hacksaw blade.  The existing vent pipe should be cut so that it protrudes 
from the outside wall ½ inch.  Clean lint accumulated in vent pipe through wall.   
3. INSTALL: (see side 2 for more detailed instructions) 
Place the flat portion of the elbow on the wall, lining up holes in wall and elbow. The 
existing vent pipe should insert ½ inch into the elbow.  Mount the vent in a vertical 
position as shown below.  Secure the 6 screws (provided) through the top bracket of 
vent and flat portion of elbow.  If the fit does not appear to be airtight, you may have 
to caulk with a bead of silicone around the square flanges. 
4. PAINT:   
Using latex paint, paint the vent when placed in an area of direct sunlight to protect 
vent from UV rays.  
5. MAINTENANCE
Remove the vent lid periodically and clean out any lint build-up, which may restrict 
free movement on the floating shuttle cup.  
 
          
SCREWS 
FLAT PORTION 
OF
 
ELBOW
 
ELBOW 
VENT BODY 
FLOATING SHUTTLE 
CUP IS POSITIONED 
OPEN SIDE DOWN
 
INSIDE BODY 
VENT LID 
ACCESSORIES 
Extension - Can be used through thicker walls from the inside duct pipe to the vent. 
Spring Kit - Convert the Dryer Vent to work for low CFM vents such as Range Hood & 
Bathroom Vents. Spring Kit comes with easy to install directions.  
Call to order, 1-888-772-2345.
 
1-888-772-2345  
  www.heartlandnatural.com