Brother XL-3027 业主指南
SEWING THE STITCHES
U
tility
S
S
titc
h
h
es
Sewing S-25
S
2
e
Press the “Start/Stop” button to sew
forward.
forward.
a Reverse stitches
→ The machine will begin sewing slowly.
→ The machine will begin sewing slowly.
f
When sewing is completed, hold the
“Reverse Stitch” button or “Reinforcement
Stitch” button to sew 3-4 reverse stitches
(or reinforcement stitches) at the end of the
seam.
“Reverse Stitch” button or “Reinforcement
Stitch” button to sew 3-4 reverse stitches
(or reinforcement stitches) at the end of the
seam.
g
After sewing, press the “Thread Cutter”
button to trim the threads.
button to trim the threads.
■ Changing the Needle Position (Left
or Middle Needle Position Stitches
Only)
Only)
When you select left or middle needle position
stitches, you can use
and
in the stitch
width display to change the position of the needle.
Match the distance from the right edge of the presser
foot to the needle with the stitch width, then align
the edge of the presser foot with the edge of the
fabric during sewing for an attractive finish.
Match the distance from the right edge of the presser
foot to the needle with the stitch width, then align
the edge of the presser foot with the edge of the
fabric during sewing for an attractive finish.
a Stitch width
Example: Left/Middle needle position stitches
CAUTION
• Be sure the needle does not strike a basting
pin, or any other objects, during sewing. The
thread could tangle or the needle could break,
causing injury.
thread could tangle or the needle could break,
causing injury.
Memo
• When the automatic thread cutting and
automatic reinforcement stitch keys on the
screen are selected, reverse stitches (or
reinforcement stitches) will be sewn
automatically at the beginning of sewing
when the “Start/Stop” button is pressed.
Press the “Reverse Stitch” or
“Reinforcement Stitch” button to sew
reverse stitches (or reinforcement stitches)
and trim the thread automatically at the end
of sewing.
screen are selected, reverse stitches (or
reinforcement stitches) will be sewn
automatically at the beginning of sewing
when the “Start/Stop” button is pressed.
Press the “Reverse Stitch” or
“Reinforcement Stitch” button to sew
reverse stitches (or reinforcement stitches)
and trim the thread automatically at the end
of sewing.
12.0 mm
(approx.
1/2 inch)
(approx.
1/2 inch)
8.5 mm
(approx.
11/32
inch)
6.5 mm
(approx.
1/4 inch)
5.0 mm
(approx.
3/16 inch)