Graco HUSKY 312877C 用户手册
Technical Data
22
312877C
Technical Data
* Sound power measured per ISO-9614-2.
** Sound pressure was tested 3.28 ft (1 m) from equipment.
** Sound pressure was tested 3.28 ft (1 m) from equipment.
All trademarks mentioned in this manual are the property of their respective owners.
Maximum fluid working pressure . . . . . . . . . . . . . . . 125 psi (0.86 MPa, 8.6 bar)
Air pressure operating range . . . . . . . . . . . . . . . . . . 20-125 psi (0.14-0.86 MPa, 1.4-8.6 bar)
Maximum air consumption . . . . . . . . . . . . . . . . . . . 67 scfm
Air pressure operating range . . . . . . . . . . . . . . . . . . 20-125 psi (0.14-0.86 MPa, 1.4-8.6 bar)
Maximum air consumption . . . . . . . . . . . . . . . . . . . 67 scfm
Air consumption at 70 psi (0.48 MPa, 4.8 bar),
20 gpm (76 lpm) . . . . . . . . . . . . . . . . . . . . . . . . 25 scfm
20 gpm (76 lpm) . . . . . . . . . . . . . . . . . . . . . . . . 25 scfm
Maximum free-flow delivery. . . . . . . . . . . . . . . . . . . 50 gpm (189 lpm)
Maximum pump speed . . . . . . . . . . . . . . . . . . . . . . 280 cpm
Fluid displacement per cycle . . . . . . . . . . . . . . . . . . 0.17 gal. (0.64 liters)
Maximum suction lift . . . . . . . . . . . . . . . . . . . . . . . . 16 ft (4.9 m) dry, 29 ft (8.8 m) wet
Maximum size pumpable solids. . . . . . . . . . . . . . . . 1/8 in. (3.2 mm)
Sound Power*
Maximum pump speed . . . . . . . . . . . . . . . . . . . . . . 280 cpm
Fluid displacement per cycle . . . . . . . . . . . . . . . . . . 0.17 gal. (0.64 liters)
Maximum suction lift . . . . . . . . . . . . . . . . . . . . . . . . 16 ft (4.9 m) dry, 29 ft (8.8 m) wet
Maximum size pumpable solids. . . . . . . . . . . . . . . . 1/8 in. (3.2 mm)
Sound Power*
at 70 psi (0.48 MPa, 4.8 bar) and 50 cpm . . . . .
at 100 psi (0.7 MPa, 7.0 bar) and full flow . . . . .
at 100 psi (0.7 MPa, 7.0 bar) and full flow . . . . .
78 dBa
90 dBa
90 dBa
Sound Pressure**
at 70 psi (0.48 MPa, 4.8 bar) and 50 cpm . . . . .
at 100 psi (0.7 MPa, 7.0 bar) and full flow . . . . .
at 100 psi (0.7 MPa, 7.0 bar) and full flow . . . . .
84 dBa
96 dBa
96 dBa
Operating temperature range . . . . . . . . . . . . . . . . . see page 23
Air inlet size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/2 npt(f)
Fluid inlet size
Air inlet size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/2 npt(f)
Fluid inlet size
Aluminum (
1050A
). . . . . . . . . . . . . . . . . . . . . . .
Plastic (
1050P
and
1050C
) . . . . . . . . . . . . . . . .
Stainless Steel (
1050S
) . . . . . . . . . . . . . . . . . . .
1 in. npt(f) or 1 in. bspt
1 in. raised face ANSI/DIN flange
1 in. npt(f) or 1 in. bspt
1 in. raised face ANSI/DIN flange
1 in. npt(f) or 1 in. bspt
Fluid outlet size
Aluminum (
1050A
). . . . . . . . . . . . . . . . . . . . . . .
Plastic (
1050P
and
1050C
) . . . . . . . . . . . . . . . .
Stainless Steel (
1050S
) . . . . . . . . . . . . . . . . . . .
1 in. npt(f) or 1 in. bspt
1 in. raised face ANSI/DIN flange
1 in. npt(f) or 1 in. bspt
1 in. raised face ANSI/DIN flange
1 in. npt(f) or 1 in. bspt
Weight
Aluminum (
1050A
). . . . . . . . . . . . . . . . . . . . . . .
Plastic (
1050P
and
1050C
) . . . . . . . . . . . . . . . .
Stainless Steel (
1050S
)
with conductive polypropylene center . . . .
with polypropylene center . . . . . . . . . . . . .
with aluminum center . . . . . . . . . . . . . . . .
with polypropylene center . . . . . . . . . . . . .
with aluminum center . . . . . . . . . . . . . . . .
23 lb. (10.5 kg)
18 lb. (8.2 kg)
18 lb. (8.2 kg)
36.3 lb. (16.5 kg)
37.3 lb. (16.9 kg)
41.4 lb. (18.8 kg)
37.3 lb. (16.9 kg)
41.4 lb. (18.8 kg)
Wetted parts
Aluminum (
1050A
). . . . . . . . . . . . . . . . . . . . . . .
Plastic (
1050P
and
1050C
) . . . . . . . . . . . . . . . .
Stainless Steel (
1050S
) . . . . . . . . . . . . . . . . . . .
aluminum and material(s) chosen for seat, ball, and
diaphragm options
polypropylene and material(s) chosen for seat, ball,
and diaphragm options
stainless steel and material(s) chosen for seat, ball,
and diaphragm options
diaphragm options
polypropylene and material(s) chosen for seat, ball,
and diaphragm options
stainless steel and material(s) chosen for seat, ball,
and diaphragm options
Non-wetted external parts
Aluminum (
1050A
). . . . . . . . . . . . . . . . . . . . . . .
Plastic (
1050P
and
1050C
) . . . . . . . . . . . . . . . .
Stainless Steel (
1050S
) . . . . . . . . . . . . . . . . . . .
aluminum, coated carbon steel
stainless steel, polypropylene
stainless steel, polypropylene or aluminum (if used in
center section)
stainless steel, polypropylene
stainless steel, polypropylene or aluminum (if used in
center section)