Brother LX-1200 快速安装指南
- 34 -
(4)
Remove the film cartridge from the machine.
(5)
Open the cartridge shutter and remove the
document from the film slit of the cartridge.
document from the film slit of the cartridge.
(6)
Remove any excess laminating film by cutting
along the engraved “cutting line” on the
cartridge before reinserting the cartridge.
along the engraved “cutting line” on the
cartridge before reinserting the cartridge.
(7)
Place the film cartridge into the machine.
Note
Do not pull the document from the opposite
side.
Do not pull the document from the opposite
side.
Note
Make sure that the shutter of the cartridge is
closed. If open, push the shutter buttons to
close the shutter.
Make sure that the shutter of the cartridge is
closed. If open, push the shutter buttons to
close the shutter.
Note
Make sure that the film is installed correctly.
Make sure that the film is installed correctly.
Note
Use scissors or Cut to extract the jammed film
and remove the film cartridge, if necessary.
Use scissors or Cut to extract the jammed film
and remove the film cartridge, if necessary.