Benq PE8700 用户手册

4. Basic Operation

18

■

Press the PIP button to enable the PIP function.

■

For PIP purposes, there are two groups of inputs 
classfied according to their display modes: 
Video Group: Video, S-Video and Component Y/
C

B

/C

R

 inputs 

Graphic Group: HDTV input and Computer input. 

■

The PIP function allows the projector to display 
one input from the Graphic Group within one 
input from the Video Group, or display one input 
from Video Group within one input from the 
Graphic Group.

■

Press the PIP button to switch to the main 
window or turn off the PIP function.

■

Select the input source for the main window by 
pressing the INPUT button.

■

 Press the POP key to enable the POP function.

■

Press the ACTIVE button to switch to the active 
window. You can change the input signal setting in 
the active window.

■

Press + or - to adjust the size of the PIP window.

■

Adjust the position of the PIP window with the 
ARROW keys (c/e/d/f).

■

Press the OFF key on the remote control or the 
STANDBY/ON key on the projector to turn the 
projector off.

■

After turning the projector off, the POWER LED 
will flash green and the fans will run for one 
minute to cool the lamp. The projector will not 
respond to any commands until cooling process is 
complete. The POWER LED will be lit a steady 
orange once the cooling process has finished.