GE ISOVOLT Titan E 产品宣传册

X-ray Warning Flash Lamp

When X-rays are being generated from 

an X-ray tube there must be a clear 

and safe indication of this hazardous 

condition. All GE Inspection Technolo-

gies controls are equipped with multiple 

warning facilities, including the „High 

Voltage ON“ indication lamp on the  

control panel. 

While other external warning lamps 

might fail due to a defective bulb or 

other reasons, this „High Voltage ON“ 

lamp is connected in a fail-safe circuit 

causing the high voltage to be inter-

rupted in the event of bulb burnout or 

other malfunction. 

This has been a standard feature on 

all modern GE Inspection Technologies 

controls for over two decades.

The protection offered by the X-RAY 

WARNING FLASH LAMP with „FAIL-SAFE 

CIRCUIT“ is now available in this exter-

nal warning lamp, too, as required by  

DIN 54113 and many other new safety 

standards. A built-in opto-electronic cir-

cuit monitors the function of the flash 

lamp. Should the bulb of the warning 

lamp cease to function for any reason, 

the circuit will interrupt the high voltage 

and the generation of X-rays.

GE

Sensing & Inspection Technologies