Behringer Digital Mixer X32 手册
music-group.com
behringer.com
4
BUS 1-8
1
Note 73
on (127) / off (0), push non-latching
BUS 9-16
1
Note 74
on (127) / off (0), push non-latching
MTX 1-6
1
Note 75
on (127) / off (0), push non-latching
GROUP Faders
1
CC0-7
0-127
HUI selected and Remote is enabled+active, then the group fader section and buttons will emulate the
HUI control surface protocol, i.e. for ProTools.
HUI control surface protocol, i.e. for ProTools.
•
SELECT/SOLO 1-8 buttons will select or solo the corresponding track in the DAW, in banks of
8 tracks
8 tracks
•
Sends On Fader = enables touch-writing a fader automation on selected track, track automation
mode in DAW must be ‘touch’, (latching)
mode in DAW must be ‘touch’, (latching)
•
use the layer buttons to determine the function assigned to the MUTE 1-8 buttons, the LED
displays indicate that function
displays indicate that function
–
Group DCA 1-8 = allows to move the bank selection of tracks in a DAW, (push non-latching)
–
BUS 1-8 = allows to set DAW tracks to ‘Record Ready’, (push non-latching)
–
BUS 9-16 = enables using the MUTE buttons for track mute in the DAW, (latching)
–
MTX 1-6 = enables using the MUTE buttons for transport controls in the DAW, (latching)
MACKIE CTRL selected and Remote is enabled+active, then the group fader section and buttons will
emulate the Mackie Control Universal protocol
emulate the Mackie Control Universal protocol
•
SELECT/SOLO 1-8 buttons will select or solo the corresponding track in the DAW, in banks of
8 tracks
8 tracks
•
Sends On Fader = enables touch-writing a fader automation on selected track, track automation
mode in DAW must be ‘touch’ or ‘latch’, (latching)
mode in DAW must be ‘touch’ or ‘latch’, (latching)
•
use the layer buttons to determine the function assigned to the MUTE 1-8 buttons, the LED
displays indicate that function
displays indicate that function
–
Group DCA 1-8 = allows to move the bank selection of tracks in a DAW, (push non-latching)
–
BUS 1-8 = allows to set DAW tracks to ‘Record Ready’, (push non-latching)
–
BUS 9-16 = enables using the MUTE buttons for track mute in the DAW, (latching)
–
MTX 1-6 = enables using the MUTE buttons for transport controls in the DAW, (latching)