Brother BAS-300G-484/484SF 业主指南

 

 

49 

KE-430D, BE-438D

Turn off the power switch at the following times, otherwise the machine may operate if the foot switch is depressed 

by mistake, which could result in injury. 

•  When threading the needle 

•  When replacing the needle and bobbin 

•  When not using the machine and when leaving the machine unattended 
Do not touch any of the moving parts or press any objects against the machine while sewing, as this may result in 

personal injury or damage to the machine. 

 

 

1.  Turn on the power switch. 

2. Press the   or   key (1) to select the number for the 

program to be sewn. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3.  Depress the foot switch to the 2nd step. 

The feed mechanism will move to the home position. 

 

 

 

 

 

 

 

 

4.  Set the material under the work clamp (2). 

(For the BE-438D, insert the button and place the 

material under the button clamp (3). (Refer to “4-7. 

Inserting the button”.) 

5.  Depress the foot switch to the 1st step. 

The work clamp (2) / button clamp (3) will be lowered. 

6.  Depress the foot switch to the 2nd step. 

The sewing machine will start sewing. 

 

*  If memory switch no. 003 is set to “ON”, the work clamp 

(2)/button clamp (3) will drop to the intermediate stop 

position when the foot switch is depressed to the 1st 

step, and when it is depressed to the 2nd step, the 

material will be held and sewing will start. 

 

 

7. Once sewing is completed and the thread has been 

trimmed, the work clamp (2) / button clamp (3) will rise. 

 

 

4441Q

1st step 
2nd step 

4116M

4460Q

4459Q