Brother FAX-2580C 用户手册
Chapter 8
54
Storing Speed-Dial numbers
8
You can store up to 80 (FAX-2480C) or 100
(FAX-2580C) 2-digit Speed-Dial locations
with a name. When you dial you will only have
to press a few keys (For example:
Search/Speed Dial, #, the two-digit number,
and Black Start or Color Start).
(FAX-2580C) 2-digit Speed-Dial locations
with a name. When you dial you will only have
to press a few keys (For example:
Search/Speed Dial, #, the two-digit number,
and Black Start or Color Start).
a
Press Menu, 2, 3, 2.
b
Use the dial pad to enter a 2-digit
Speed-Dial location number.
Press OK.
Speed-Dial location number.
Press OK.
c
Enter the fax or telephone number
(up to 20 digits).
Press OK.
(up to 20 digits).
Press OK.
d
Do one of the following:
Enter the name (up to 16 characters)
using the dial pad.
Press OK. (To help you enter letters,
see Entering Text on page 127.)
using the dial pad.
Press OK. (To help you enter letters,
see Entering Text on page 127.)
To store the number without a name
press OK.
press OK.
e
Do one of the following:
To store another Speed-Dial
number, go to step b.
number, go to step b.
To finish the setting, press
Stop/Exit.
Stop/Exit.
Changing One-Touch and
Speed-Dial numbers
Speed-Dial numbers
8
If you try to store a One-Touch or Speed-Dial
number where a number has already been
stored, the LCD will show the name or
number that has been stored there, and will
ask you to do one of the following:
number where a number has already been
stored, the LCD will show the name or
number that has been stored there, and will
ask you to do one of the following:
Press 1 to change the stored number.
#05:Mike
1.Change 2.Exit
Press 2 to exit without making a change.
If you chose 1, you will be able to change the
stored number and name, or enter a new one.
Follow the instructions below:
stored number and name, or enter a new one.
Follow the instructions below:
a
Enter a new number. Press OK.
b
Enter a new name. Press OK.
To change a character, use d or c to
position the cursor under the
character you want to change, then
press Clear/Back. Re-enter the
character.
position the cursor under the
character you want to change, then
press Clear/Back. Re-enter the
character.
c
Press Stop/Exit.