Bajaj Electricals HT65/MB165 用户手册
ENGINE STARTING
1. Set the ignition switch to “ ” position.
2. Ensure that there is fuel in the tank.
3. Set the fuel valve lever to “ON” position.
2. Ensure that there is fuel in the tank.
3. Set the fuel valve lever to “ON” position.
To start a cold engine:
1. Place the choke lever in the closed position
2. Start the engine with the pull start cord.
3. Allow the engine to idle until the engine is warm
4. Turn the carburetor choke lever to the ON position when the engine has sufficiently
2. Start the engine with the pull start cord.
3. Allow the engine to idle until the engine is warm
4. Turn the carburetor choke lever to the ON position when the engine has sufficiently
warmed up.
Procedures for stopping the engine:
1. Release the throttle twist grip to slow down the engine.
2. Set the ignition switch to “ ” position.
3. Set the fuel valve lever (the fuel tank valve) handle to “OFF” position.
2. Set the ignition switch to “ ” position.
3. Set the fuel valve lever (the fuel tank valve) handle to “OFF” position.
CAUTION
Unnecessarily increasing RPM’s to a high level while the Mini Bike is warming up is
Unnecessarily increasing RPM’s to a high level while the Mini Bike is warming up is
harmful to the engine.
CAUTION
verify oil level prior to starting (see page 11)
Starting the engine with low or no oil will damage the engine.
verify oil level prior to starting (see page 11)
Starting the engine with low or no oil will damage the engine.
WARNING
Never start the engine in a closed place as the exhausted gas from the vehicle contains
toxic carbon monoxide.
Fuel valve lever
ON
Choke Lever
Closed
ON
OFF