Baby Trend CS0190B0211 用户手册

For your child’s safety, the Safety 

Seat must be properly reclined 

when installed in the vehicle.  

The Safety Seat includes a Seat 

Angle Indicator on the lower 

portion of the shell on the child’s 

left side, to assist in achieving 

the proper angle of recline for the 

Safety Seat.  (Fig. 46-2)

Press to release

Use weight range as appropriate

See warning label on safety seat

Fig. 46-1b

Fig. 46-2

Fig. 46-1a

Failure to properly recline the Safety Seat on the vehicle seat 

increases the risk of death or serious injury.  If the Safety 

Seat is positioned too upright, the child’s head may drop 

forward and result in breathing problems.  If the Safety Seat 

is too reclined, excessive force may be exerted on the child’s 

shoulders and neck in a crash.  The following instructions 

must be carefully followed to ensure proper recline angle for 

the Safety Seat.

1. 

Safety Seat with Base: Make sure the 

vehicle is parked on level ground. Lock 

the Safety Seat onto the Base and 

check that the Safety Seat is level side 

to side on the vehicle seat. (Fig. 47-1) 

 Check the Seat Angle Indicator that 

matches the weight of your child.
• If the Seat Angle Indicator shows NO 

red, the seat is installed at the proper 

level of recline. 

• If the Seat Angle Indicator shows 

ANY red, the Safety Seat is either 

too upright or too reclined

.  If the 

seat is too upright, extend the foot 

one position at a time just until no 

red shows.  To extend the foot of the 

base, pull downward on the hand hold 

as shown in Fig. 47-2 while holding 

onto the base.  To retract the foot, 

press inward on the lock button as 

shown in Fig. 47-3 and push upward 

on the foot.  Be careful not to pinch 

your finger as the foot retracts.  

Check the level indicator to see if the 

seat is now level.

• If seat angle adjuster feature does 

not adjust enough to provide the 

Fig. 47-1

Fig. 47-2

Fig. 47-3

Foot Adjustment 

Lock Button