Epson BrightLink Solo Interactive Module (IU-01) 用户指南
Easy Interactive Pen Problems
• Make sure the USB cable is securely connected to the Interactive Unit
and computer. Try disconnecting and reconnecting the cable to your
computer.
computer.
• If you don't see the
pen icon on your taskbar (Windows) or in the
Dock (Mac OS), do one of the following:
Windows
Select
or Start > All Programs or Programs > EPSON Projector >
Easy Interactive Driver.
Mac OS
Open the Application folder, then select the Easy Interactive Driver icon.
• If you see a red
^
on the pen icon, the computer and projector are not
connected correctly. Try removing and reconnecting the USB cable.
• Make sure the pen batteries have enough power. If the light on the pen
doesn't turn green when you press the button, you need to replace the
batteries.
batteries.
• Make sure you are not casting a shadow on the projection surface, and
nothing is blocking the signal between the pen and the interactive
receiver on the Interactive Unit.
receiver on the Interactive Unit.
• Dim the room lights and turn off any fluorescent lights. Make sure the
projection surface and the pen receiver are not in direct sunlight or
other sources of bright lighting.
other sources of bright lighting.
• For easier operation, hold the pen at an angle to the projection surface.
• If the pen position is not accurate, you may need to recalibrate.
s
Calibration Problems
• If the flashing circles don't appear when you try to calibrate, make sure
the USB cable is securely connected to the computer.
s
Try restarting the Easy Interactive Driver.
s
• If the circles don't stop flashing and don't turn black (or they stop
flashing and turn black automatically), dim or turn off any bright lights
near the projection surface.
near the projection surface.
Problems and Solutions
20