Brother MFC-4300 业主指南

A U T O   D I A L   N U M B E R S   A N D   D I A L I N G   O P T I O N S      

Broadcasting is automatically sending the same fax message to multiple fax 
numbers. Using the 

 key, you can include up to 8 One Touch 

locations, up to 30 Speed Dial locations, and up to 50 manually dialed numbers 
(maximum of 88 locations if you did not use up any locations for Groups, access 
codes or credit card numbers). However, available memory will vary with the 
types of jobs in memory and the number of locations used for broadcasting. If 
you broadcast to more than the maximum locations available, you will not be 
able to set up transmissions using dual access and the timer. (See 

Although the easiest way to broadcast is to press Group keys, you can include 
One Touch, Speed Dial, and manually dialed numbers in the same broadcast.  
You must press 

 between each of these locations. Use the Telephone 

Index to help you choose the numbers easily.

After the broadcast is completed, a Broadcast Report will be printed 
automatically to let you know the results.

Place the original face down in the ADF.

Enter a number using One Touch, Speed Dial, Group numbers, Search or the 
dial pad.
Example: Group number

Press 

.  You will be prompted to press the next number.

Enter the next number.
Example: Speed Dial

Press 

.

Enter the next fax number.
Example: Manual dialing, using the dial pad.

Press 

.

Your machine will read the original into memory and then start sending faxes to 
all the numbers you entered.

To stop the broadcasting in progress, press 

.  The LCD asks if you want 

to cancel all locations or the location that is being sent.

■

Enter the long dialing sequence numbers as you normally would, but keep in mind 
that each key counts as one location, so the number of locations you can call 
become limited.

■

If the line is busy or for some other reasons a connection could not be made while 
broadcasting, the MFC will redial the number automatically.

■

If the memory is full, press 

 to abort the job or press 

 to send the portion 

that is in the memory (if more than one page has been scanned).