Brother MFC-4300 业主指南
9 - 2
P R I N T I N G R E P O R T S
Transmission Verification (Xmit) Report
You can use the Xmit Report as proof that you sent a fax. This report lists the
time and date of transmission and whether the transmission was successful.
time and date of transmission and whether the transmission was successful.
When the feature is ON, the report is printed with every fax you send.
1
Press
Function
,
1
,
7
,
1
.
2
Press
or
to select ON or OFF, and then press
Set
.
3
Press
Stop
to exit.
Activity Report Interval
You can set the MFC to print activity reports at specific intervals (6, 12, 24
hours, 2, 4 or 7 days). If you set the interval to OFF, you can print the report by
following the steps in the previous section.
hours, 2, 4 or 7 days). If you set the interval to OFF, you can print the report by
following the steps in the previous section.
1
Press
Function
,
1
,
7
,
2
.
2
Press
or
to display INTERVAL?,
and then press
Set
.
3
Press
or
to choose an interval, and then press
Set
.
(If you choose 7 days, the LCD prompts you to choose the day of the week that
the 7-day countdown begins.
the 7-day countdown begins.
4
Enter the time to begin printing, in 24-hour format, and then press
Set
.
(For example, enter 19:45 for 7:45 PM).
5
Press
Stop
to exit.
Note
When the feature is OFF, the report is printed automatically only if there’s an
error during transmission. If the report indicates NG, send the document again.
If the report indicates you should check the readability of certain pages, resend
those pages.
error during transmission. If the report indicates NG, send the document again.
If the report indicates you should check the readability of certain pages, resend
those pages.
INTERVAL?