Brother MFC-440CN 业主指南
![Brother](https://files.manualsbrain.com/attachments/8c662d2d9dbf4f824dfb46b9a1ababe38c435c2d/common/fit/150/50/d9563199756797e8650c01d5929471667ad930bd23805d8d5e013c9eee84/brand_logo.png)
Chapter 10
84
Remote Fax commands
10
Follow the commands below to access features when you are away from the machine. When you
call the machine and enter your remote access code (3 digits followed by l), the system will give
two short beeps and you must enter a remote command.
call the machine and enter your remote access code (3 digits followed by l), the system will give
two short beeps and you must enter a remote command.
Remote commands
Operation details
91
Playing Voice messages
(MFC
(MFC
-
665CW and MFC-845CW only)
After one long beep, the machine plays the ICM.
1 Repeat or Skip Backward
Press 1 while listening to an ICM to repeat it. If you press 1
before a message, you will hear the previous message.
before a message, you will hear the previous message.
2 Skip Forward
While playing the ICM, you can skip to the next message.
9 STOP Playing
Stop Playing the ICM.
93
Erase all ICM
(MFC
(MFC
-
665CW and MFC-845CW only)
If you hear one long beep, the erase is accepted. If you hear
three short beeps, you cannot erase because all voice
messages have not been played, or there are no voice
message to erase.
three short beeps, you cannot erase because all voice
messages have not been played, or there are no voice
message to erase.
*This code erases all recorded messages, not one at a time.
94
Play and Record OGM in Memory
(MFC
(MFC
-
665CW and MFC-845CW only)
1 Play
1 Msg Ctr OGM
The machine plays the selected OGM. You can stop playing
OGMs by pressing 9.
OGMs by pressing 9.
2 F/T OGM
2 Record
1 Msg Ctr OGM
After one long beep, you can record the selected OGM. You
will hear the message played once. You can stop recording
the message by pressing 9.
will hear the message played once. You can stop recording
the message by pressing 9.
2 F/T OGM
95
Change the Fax Forwarding,
Paging or Fax Storage settings
Paging or Fax Storage settings
1 OFF
You can choose Off after you have retrieved or erased all
your messages.
your messages.
2 Fax Forwarding
One long beep means the change is accepted. If you hear
three short beeps, you cannot change because something
has not been set up (for example, a Fax Forwarding or
Paging number has not been registered). You can register
your Fax Forwarding number by entering 4. (See Changing
your Fax Forwarding number on page 86.) Once you have
registered the number, Fax Forwarding will work.
three short beeps, you cannot change because something
has not been set up (for example, a Fax Forwarding or
Paging number has not been registered). You can register
your Fax Forwarding number by entering 4. (See Changing
your Fax Forwarding number on page 86.) Once you have
registered the number, Fax Forwarding will work.
3 Paging
4 Fax Forwarding number
6 Fax Storage
96
Retrieve a fax
2 Retrieve all faxes
Enter the number of a remote fax machine to receive stored
fax messages. (See Retrieving fax messages on page 86.)
fax messages. (See Retrieving fax messages on page 86.)
3 Erase faxes from the memory
If you hear one long beep, fax messages have been erased
from the memory.
from the memory.
97
Check the receiving status
(MFC-440CN only)
(MFC-440CN only)
1 Fax
You can check whether your machine has received any
faxes. If yes, you will hear one long beep. If no, you will hear
three short beeps.
faxes. If yes, you will hear one long beep. If no, you will hear
three short beeps.