Brother MFC-440CN 快速安装指南
Installing the Driver & Software
27
Macintosh
®
Ma
c
int
os
h
®
Netw
o
rk
6
Turn on your Macintosh
®
.
7
Put the supplied CD-ROM into your CD-ROM
drive.
drive.
8
Double-click the Start Here OSX icon to install.
Follow the on-screen instructions.
Follow the on-screen instructions.
Please wait, it will take a few seconds for the
software to install. After the installation, click
Restart to finish installing the software.
software to install. After the installation, click
Restart to finish installing the software.
9
The Brother software will search for the Brother
device. During this time the following screen
will appear.
device. During this time the following screen
will appear.
Note
• If the machine is configured for your network,
choose the machine from the list, and then click
OK. This window will not appear if there is only one
machine connected on the network, it will be
chosen automatically. Go to step
OK. This window will not appear if there is only one
machine connected on the network, it will be
chosen automatically. Go to step
10.
• If this screen appears click OK.
• Enter a name for your Macintosh
®
in
Display Name up to 15 characters long and click
OK. Go to step
OK. Go to step
10.
• If you want to use the machine’s Scan key to
scan over the network you must check the
Register your computer with the “Scan To”
function on the machine box.
Register your computer with the “Scan To”
function on the machine box.
• The name you enter will appear on the
machine’s LCD when you press the Scan key
and choose a scan option. (For more
information, see Network Scanning in the
Software User’s Guide on the CD-ROM.)
and choose a scan option. (For more
information, see Network Scanning in the
Software User’s Guide on the CD-ROM.)
10
Click Add.
Note
For Mac OS
®
X 10.4 users, go to step
11
For Mac OS
®
X 10.2.4 to 10.3.x users:
Make the selection shown below.