Brother MFC-3200C 业主指南

 

A S S E M B L Y   A N D   C O N N E C T I O N S      

 

The external TAD 

 

 be plugged into the back side of the MFC, in the jack 

labeled EXT. Your MFC cannot work properly if you plug the TAD into a wall 
jack (unless you are using Distinctive Ring).

 

Plug the telephone line cord from the wall jack into the back side of the MFC, 
in the jack labeled LINE.

 

Plug the telephone line cord from your external TAD into the back side of the 
MFC, in the jack labeled EXT. (Make sure this cord is connected to the TAD at 
the TAD’s telephone line jack, and not its telephone set jack.)

 

Set your external TAD to four rings or less. (The MFC’s Ring Delay setting does 
not apply.)

 

 

Set the TAD to answer calls.

 

Set the Receive Mode to 

 

. 

 

, page 6-1.)

 

You 

 

 plug your TAD into the EXT. jack of your MFC. If your TAD is 

plugged into a wall jack, both your machine and the TAD will try to control the 
phone line. (See illustration on page 2-14.)

 

 (unless you have 

the Distinctive Ring service).