Brother MFC-3200C 业主指南

 

S E T U P   R E C E I V E      

 

There are three different receive modes for your MFC. You may choose the 
mode that best suits your needs by pressing 

 

 repeatedly until the 

LCD shows the setting you want to use.

*In FAX/TEL mode you must set the Ring Delay and F/T Ring Time. If you have 

extension phones on the line, keep the Ring Delay set to 

 

 rings.

 

(automatic receive)

The MFC automatically 
answers every call as a fax.

For dedicated fax lines. 
You cannot receive a voice 
call but you can call out.

 

*

(fax/telephone)

The MFC controls the line 
and automatically answers 
every call.
If the call is a fax it will 
receive the fax. If the call is 
not a fax it will ring 
(double-ring) for you to 
pick up the call.

You cannot have an 
answering machine on the 
same line, even if it is on a 
separate wall jack on the 
same line.
You cannot use the 
telephone company’s Voice 
Mail in this mode.

 

(external telephone 
answering device)

The external TAD 
automatically answers 
every call. Voice messages 
are stored on the external 
TAD. Fax messages are 
printed.

Use this mode if you have 
an external answering 
machine on your phone 
line.

 

(manual receive)

You control the phone line 
and must answer every call 
yourself.

Use this mode when you 
are using a computer 
modem on the same line or 
if you receive very few fax 
messages.
You can also use this mode 
with Distinctive Ring.