Brocade Communications Systems Upgrade Pef IPMC5000PEF IPMC5000PEF 用户手册

Inactivity interval

How long a forwarding entry can remain unused before the device deletes it.

Hardware Drop Enabled Displays Yes if the Passive Multicast Route Insertion feature is enabled and No if it is

not.

Prune Wait Interval

The amount of time a PIM device waits before stopping traffic to neighbor devices that do
not want the traffic. The value can be from zero to three seconds. The default is three
seconds.

Graft Retransmit interval The interval between the transmission of graft messages.

Prune Age

The number of packets the device sends using the path through the RP before switching
to using the SPT path.

Route Precedence

The route precedence configured to control the selection of routes based on the four
route types:

•

Non-default route from the mRTM

•

Default route from the mRTM

•

Non-default route from the uRTM

•

Default route from the uRTM

Displaying all multicast cache entries in a pruned state

Use the following command to display all multicast cache entries that are currently in a pruned state
and have not yet aged out.

Device(config)# show ip pim prune

    1 (104.1.1.2 231.0.1.1): 

   e2/2,2/2(150)      

    2 (108.1.1.100 231.0.1.1): 

   e2/2,2/2(150)      

    3 (104.1.1.2 231.0.1.2): 

   e2/2,2/2(150)      

    4 (108.1.1.100 231.0.1.2): 

   e2/2,2/2(150)      

    5 (108.1.1.100 231.0.1.3): 

   e2/2,2/2(150)      

    6 (104.1.1.2 231.0.1.4): 

   e2/2,2/2(150)      

    7 (108.1.1.100 231.0.1.4): 

   e2/2,2/2(150)      

    8 (104.1.1.2 231.0.1.5): 

   e2/2,2/2(150)      

    9 (108.1.1.100 231.0.1.5): 

   e2/2,2/2(150)     

Total Prune entries: 9

Syntax: show ip pim [vrf vrf-name ] prune

Displaying all multicast cache entries

You can use the following command to display all multicast cache entries.

Brocade(config)# show ip pim mcache

Displaying all multicast cache entries in a pruned state